- Видео 57
- Просмотров 271 251
EXFIL OFF ROAD
США
Добавлен 24 авг 2015
Owned and operated by a disabled combat veteran, thanks for the support.
The Trail Till Now journey + Off-road content, instructional / install videos for seven slot vehicles.
The Trail Till Now journey + Off-road content, instructional / install videos for seven slot vehicles.
Jeep Wrangler Roof Rack
If you are looking for more storage in your Jeep Wrangler, this might be for you. The Barricade Roof Rack can carry 150 pounds and looks pretty slick. It is removable and does not interfere with the freedom front panels. This is compatible with the Jeep Gladiator as well.
Просмотров: 452
Видео
Time To Correct Your Jeep Seat Angle
Просмотров 1223 месяца назад
If your considering a more comfortable ride in you Jeep Wrangler, take a look at the Desert Does It Seat Jackers, which turn your bench like seat into a bucket seat with way more comfort for the legs and lower back.
No More Carpet
Просмотров 5393 месяца назад
I install Armorelite flooring into the JLU and the JT! If you are considering changing the flooring in your Jeep Wrangler or Gladiator, this might help you decide. If you're installing on a Jeep Gladiator watch this first, for tips not included in Armorlite's install.
TTN SHORT #4 TABLET MOUNT
Просмотров 196Год назад
Check out this nifty way to mount a tablet overhead in your Jeep Wrangler or Jeep Gladiator.
TTN SHORT #3 RECOVERY BOARD STORAGE OPTION
Просмотров 140Год назад
Giving you an option to store your recovery boards if you have an enclosed bed cap such as the SmartCap EVO A
TTN SHORT #1.5 DAUGHTERS 1ST HUNT
Просмотров 41Год назад
Join my daughter and I as she attempts her first Javelina Hunt. Warning, it didn't go as planned.
TTN SHORT #2 EPIC ADVENTURE OUTFITTERS KRAKEN
Просмотров 208Год назад
The twin ARB air compressor and Kraken tire inflation system make the Power Tank obsolete in Jeeps. Besides who likes carrying a pressure bomb around on 112 plus summer days?
TTN SHORT #1 DAUGHTERS HUNT PREP
Просмотров 38Год назад
Welcome to the Trail Till Now first short video. Join us as I prep my daughter for her next hunt.
Oil Catch Can For Your Jeep
Просмотров 254Год назад
You're probably going to want to install this onto your jeep. Universal Oil Catch Can- a.co/d/bVzXlxH 6 FT- 5/8 Inch Heater Hose - a.co/d/9Bl0rJs
The Trail Till Now #4
Просмотров 334Год назад
On this episode, a walk around of our 2021 Jeep Gladiator build. Build List: @EPIC-4WD Kraken Tire Inflation System ARB Dual Air Compressor @AdventureLab JL/JT Overhead Molly Shelf @MidlandRadioCorp MTX 275 GMRS Radio Bulletproof Mounting Solutions Rubi-Grid Nexar Scosche Nexs1 Dash Camera American Adventure Lab JL/JT Quick Release Front Inner Fenders @teraflexsuspensions CT2 Suspension with Al...
JEEP ANTENNA DELETE
Просмотров 10 тыс.2 года назад
A quick break down on how to remove the factory antenna from your Jeep Wrangler or Gladiator. Product link- mythreedom.com
THE TRAIL TILL NOW #3
Просмотров 1002 года назад
I pack the family up and we head to northern Arizona for a few days of relaxation and Jeep trail driving at Schnebly Hill and Broken Arrow Trail.
BEST JEEP FOB EVER!
Просмотров 4912 года назад
Take a look at likely the best Jeep fob you will ever find. I love this thing, such an upgrade. Why Jeep could not come up with this is beyond me.
Replacing your Jeep Auxiliary Battery
Просмотров 49 тыс.2 года назад
If you want to change out your auxiliary battery on your Jeep Wrangler JL or Jeep Gladiator JT without going to the dealer, its completely possible and without going through your topside engine bay fuse box.
Jeep Gladiator Passive Entry Install
Просмотров 7 тыс.2 года назад
Jeep Gladiator Passive Entry Install
Increase Your Jeep Gladiator Reverse Lighting
Просмотров 3 тыс.3 года назад
Increase Your Jeep Gladiator Reverse Lighting
TeraFlex Nomad Wheels or Beadlocks?
Просмотров 2,9 тыс.3 года назад
TeraFlex Nomad Wheels or Beadlocks?
Rebel Off Road Summit Jeep Gladiator Front Bumper
Просмотров 2,6 тыс.3 года назад
Rebel Off Road Summit Jeep Gladiator Front Bumper
Really great video man. Thanks!
Great vid. Thanks. Gunna do my 2001 JL.
I hope this is a typo 😂
Hi, I like your content. Do you accept sponsored products?
Is there a part number or link for the plastic blanks that need to be installed and cut?
I actually got them from a guy on Instagram, snotthejeep however, oracle lights makes a plug and play very nice and close to this if you aren’t able to locate a plate.
What kind of wire did you use to extend the USB through dash?
16 gauge strand.
Thanks. Attempting tonight.
HEY SHIPMATE, HOW IS IT HOLDING UP? IS THAT TIRE A 35"? ANY SAG OR DID YOU HAVE TO DO ANY READJUSTMENT? I AM REALLY STRUGGLING WITH THROWING DONE $1200 BUT I HAVE TO UPGRADE MY JL JUST WENT TO A DIFFERENT SIZED WHEEL AND TIRE ...
It’s holding up great, no adjustments
I did the same with my Willy's and it didn't work 😢
That’s a first. I’m sure that it will. Did you double check to make sure that the passive entry setting change stayed on ?
Perfect! Save me time with my install. TY!
Great
Thank you for making this. I want these lights and want to install them exactly the same way. Only thing holding me up now is figuring out how to get them to blink instead of of chase on the turn signal
Go with quake led. American adventure lab is trash for standing behind their product.
Looks good I have a JT looking to put in that arb system also I see now I’m going to need that to ty keep them coming
You bet
Thanks so much for this video! This is a nice upgrade for my 2022 4XE Rubicon. Awesome tutorial, without your vid I would have been lost since the part contained no install instructions. Worst part was putting the AC panel off and hoping nothing broke. Thanks again!
Glad I could help!
What blows my mind is why Jeep keeps undoing things like this? Even the leaking issue up front, or where the hard top sit to the frame, why didn’t they think “hey it might leak, I think we need to design it better.”
I agree. I assume for this one though the design flaw was actually the leather middle seat head rest. They made it so it interferes with the cup holder. So instead of making the headrest less of an angle they remove the cup holder. 🤦🏻♂️
Great vid. Couldn't have done it without you
Glad I could help
Nice, I was looking for a video like this. My Willys has the all plastic fenders, I'm assuming I can do the same and just dremmel off the excess plastic?
Go for it!
Should of back that jam nut back out till it hit that lock ring
Does anyone know the name for the clips for the replacement liners? Mine broke off when trying to put them back together
Did you check the moparparts.com? They have a breakdown of pieces
@@ExfilOffRoad I will look there, thanks
Future tip pop it into 4hi and the collar will lock on the inner shaft and you can remove the passenger side just like the driver no need to touch fad at all!
Mmm good tip
How many ports could you use to tap into the 12v cigarette outlet? I have one outlet and if its safe id like to put maybe 3 or 4 ports in my vehicle.
I don’t think I understand what you’re looking to do other than add more “ports”
@@ExfilOffRoad is it safe to add multiple ports tapped to the same 12v port?
@@SilverSin well sir I am not an electrical engineer. But I will say this. Taping into the 12v for usb is probably not going to be an issue. If you’re trying to power something larger than a phone, I would say use the larger capacity auxiliary lines that are available instead of the cigarette line. Those will be located in the lower right of the passenger foot area side panel. There is one that is 12v and literally made for a straight connection and doesn’t require the use of an auxiliary button to make it live. Hope this helps.
@@ExfilOffRoad awesome thank you bruv! One more question, could I insert a fuse between each line that's been tapped to the 12v?
Yes you can. Fuses just limit lines so if that line is gonna fry, the entire thing isn’t
Doesn't this make the seats sit higher when you lay it down
Just a tad. Nothing noteworthy
Big waste of money, nothing but problems!
How is it holding up? Any scratches or noises?
Great. No noise, no issues
I think i saw your other video for innovative at product air system, and now you change to kraken system ? Is there any reason ?
Just trying a different product. Both are great options.
FANTASTIC Step by step! Very helpful for a lot of different reasons. I just needed to hide wires for an amateur radio. But now...the sky is the limit. Thank you very much. - liked and subbed.
Thank you 🙏🏻
Thank you so much for this video! I just installed the cup holder in my wife's Jeep. It was a pain but I don't think I could have done it without your video.
No problem glad to help
If you use the wiring inside can use that color under the hood?
You only have 4 switches available so if you use a line under the hood and in the car it’s all tied to that and will run both. 2 lines are built for low draw and the others high draw like winches and lights. So technically you could use a high draw for multiple things you just have to be okay with everything you put on it having power.
Dumb question but which pin waterproof connector do I need? Amazon shows 1, 2, 3, and 4 pin.
2 pin
Which brand ball joint press did you use in the video?
Pretty sure the link is in the description.
Good tutorial. Thanks. Only thing- the lack of what ever dropped out when axle was pulled, do you put that piece in during the axle entry or after the axle is mounted on the knuckle? Then insert the piece for the fork? You mentioned something about not being aligned on disassembly, something needs to be aligned on axle entry? The fork unit need new seal or gasket? This ball joints priced at $600, is it worth the price compared to Synergy hd joints? $300. Anti seize would be us3d because of dissimilar metal contact?
What dropped was the engagement ring. It’s easy to put back in. When you do it you will see how it fits. Yes you will see how it aligns when you open it up, it’s super simple. No new seals or gaskets needed, at least not on these new ones yet, can’t imagine you would need anything new. Do not buy the synergy they will fail in a couple months. Anti seize isn’t necessary you won’t ever be taking the housing out again. When you replace the internals, you take the tops off you don’t have to press them in or out again. Another option for you could also be the ball joint delete. There are some issues with noise over time but that’s up to you.
first time I heard of ball joint delete, thanks for the lead.@@ExfilOffRoad
Awesome video after you did the passenger side did you add oil back ? Because I noticed it leaked out after you took it out
No it was not a substantial amount
Are they made in USA?
No idea check Teraflex website
What stroke were you using? 8 inch or 10 1/2 inch stroke
Misleading title.
Yea it is
Outstanding job on making this vid. Details and step by step are much appreciated. I’ll be doing this when my parts arrive this weekend, but I went with the mevotech TTX ball joints for my diesel JL. Factory Dana ball joints are total crap. I stripped out the thread on one overtightening to stop the clicking on turns. And can’t thank you enough for listing the tool list. Just ordered that weighted hammer 💪🏽.
Comments like this are exactly why I make videos. Here’s to a smooth install 🍻
Amazon link not working for the ARB wire harness. Can you repost link? Thank you
Maybe will work now but otherwise just search arb freezer harness and it will come up
My passenger side shaft was a bi!ch to get out. Took longer than getting the knuckle off.
But you did it!
Yes, but found your video after the fact. Still a great vid though.
Oh bummer… thanks though
This didn't age well. 😕 This is why we love competition. It definitely forces the competitors to come out with a better product.
What am I missing?
This video was no good!!! How the hell you go from talking about the camera to the entire backpack mounted this was more of a venting video on how to talk about your G job wiring process 🤣🤣
Sorry you feel that way. Been a longtime since I’ve looked at this however I’m pretty sure the main concern in this is wiring the camera and the lighting electrical. The pack has instructions and is very straight forward.
looking to use these on a different application but cant find the dimensions of the lights online. i guess i could follow around a jl with a tape measure 😂. but if you could let me know the dimensions, I'd appreciate it
Unfortunately I’m away for the next two weeks. But I did want to help you out. I did see the stock reflector dimensions are 3x3x1. Obviously it’s not a square but should give you an idea of the space your working with. Sorry I could not be of more assistance.
@@ExfilOffRoad that puts me in the ballpark. Thank you!
I ordered a set. they are 2.77 x 2.38... or about 2-3/4 x 2-3/8 and 1/2" deep.
So you basically installed a United Airlines seat adjustment lol.
Basically
If you remove the aux battery then connect the positive from the aux battery to the positive of the main battery then tie the aux ground out of the way you wont need the aux battery anymore. I removed my aux battery 4 years ago.
Does your auto start stop still work? If so, how’s your main battery held up?
Yes the stop start still works because the aux battery is connected to the main. I dont have any issues with the stop start draining my main battery because I disabled the stop start as soon as I bought my Jeep. Ive never used it and will never use it. I run a winch and offroad lights and havent had any issues with draining the main battery. I did this 4 years ago and I have 120k miles on my Jeep with no issues.@@ExfilOffRoad
You didnt show anything other than what you bought and cutting out your panel from the bed liner?
Yea pretty much 😂 sorry to disappoint. The directions break down the wiring and the point was to show you can wire a outlet to the bed if you did not get the factory option.
Great video! Are your light wires connected to your main battery or do you have a dual battery setup?
It goes to the main battery.
@@ExfilOffRoad thank you!
very clean
Appreciate it
So, unlike a shock, when these are 'locked' the piston is depressed all of their set travel. And when unlocked, if you are wheeling and compressing, say, the driver side the piston is still closed and the sway bar still moves BUT the passenger side 'opens' instead of being pulled with the sway bar. Do I understand this correctly?
Correct
Good video. Minus the awful country music in the background
Whoa 🤯
I know you assume the wiring is a no-brainer. But for those of us without a brain, a minute or two of showing what was involved, even quickly, would have helped. Thanks for the video.
Thanks for the comment. I agree with you, and I also believe the instructions for wiring in the outlet package show exactly what to do. This was not a video on the basics of how to wire electronics, and I may do one of those now that you bring this up. Usually people do not attempt to do their own wiring without any previous experience, it is something I did not consider when making this video.
Thank you for the great video! Nothing like buying the cup console and no directions on how to install lol. Couldn't have installed this without this video!!!
Glad I could help!
I can’t see the link for the usb device
Let me know if that works. I just put something in the video description.
Im ordering one now!! Does the 3M tape come with the badge, or di you buy it elsewhere? Thanks
Comes with 3m
Nice video where you buy the cover?
Link in description